vPlug2.1.0
February 8, 2008 – 10:11 pmHistory
————
- Added MCT I2 (AU). (thnx to a friend for the dump and thnx to Tapis for the info)
Notes:
- Plz update all of the included files (not just a .dll file)
- MCT changes the keys every 30 minutes. (so don’t change v_emm.ini parameters)
- Only CA_ID 0×0628 is supported. (only these kinds of channels should work)
- Make sure during AU, selected CA_ID is 0×0628. (otherwise it won’t work)
(or edit your v_sids.db, add MCT’s info and disable auto-ecm)
- Rescan this transponder to update its ECM and EMM data. (some of the dvb-s players show wrong data…)
- MCT changes the keys every 30 minutes. (so don’t change v_emm.ini parameters)
- Only CA_ID 0×0628 is supported. (only these kinds of channels should work)
- Make sure during AU, selected CA_ID is 0×0628. (otherwise it won’t work)
(or edit your v_sids.db, add MCT’s info and disable auto-ecm)
- Rescan this transponder to update its ECM and EMM data. (some of the dvb-s players show wrong data…)
————–
Update 12.02.2008
Download
————–
Update 16.02.2008
Download
32 Responses to “vPlug2.1.0”
great job again! few seconds and mct is open!
thaks very much!
By Mille on Feb 9, 2008
That`s Work , ok 100%
TAnx
By Reza-sony on Feb 9, 2008
Many Thanks mighty Vahid
By betatest on Feb 9, 2008
Hi,
Always surprising my dear Vahid…
Congratulations for your hobby !!
By Le Doc' on Feb 9, 2008
Yes,MCT is now AU thanks
By sdfman on Feb 9, 2008
Very Good , Waiting to ART/Showtime/Orbit AU
By Selmen on Feb 9, 2008
Wow ! Thanks ! Finally something new to ‘educate’
By nobodyknows25 on Feb 9, 2008
Thank you Vahid, you are the best
By AMG on Feb 9, 2008
Thank you Vahid, you are the best.
MCT & Redlight AU OK.
By MEHDI on Feb 9, 2008
Update for vPlug 2.1.0
for all you can not see all channels with Irdeto2 0628
V_plug.ini
ProviderID_IgnoreList Update
Standard Config:
AutoECM=0
AutoPMT=1
AutoCAT=1
v_sids.db Update
MCT & Redlight packed
———————
MCT Asian-Ultra,
MCT Elegance-Amateur,
MCT Fantasy-Free,
MCT Gay-Trans,
MCT Plus-Glamour,
MCT Sct,
MCT Sex,
Redlight German,
Redlight Italy,
Redlight LATINO
Redlight Mixx
http://rapidshare.com/files/90400351/vplug_config_MCT.rar.html
Regards MM
By MrMac on Feb 9, 2008
Sorry dude,
cannot install vplug !!
antivir software says Trojan horse Downloader.Zlob.UAQ detected…..
By Seppal on Feb 9, 2008
Hi dude,
Update your AVG and it should be fine. It’s a false alarm.
http://nsis.sourceforge.net/NSIS_False_Positives
By Vahid on Feb 9, 2008
با تشکر
انشاء الله که روی کانال پارازیت نفرستن
By ali1497 on Feb 9, 2008
@ali1497
If they could do so, they’d have done it long before. So don’t be afraid and keep watching.
By vahid021 on Feb 10, 2008
Hi Vahid,
thanks for the job that you do for all of us.
I have seen that your last development has allowed to open new channels that have the characteristic to speak an international language. ………. mmmm…. aaaahhhh. …… uuuuhhhh. …. and others similar
.
There are other channels that speak an international language and they are those that transmit music, possibly classical music .
Can I hope in the future to have the pleasure to see and to listen to classical music?
I hope of yes.
Thanks however for your polite attention
Good job and regards from an Italian friend
By nonnojet on Feb 11, 2008
It seems you missed XME and its related channels…
By Vahid on Feb 11, 2008
dear vahid.
Premiere`s AU seems to be down.
But not the MCT/Redlight. thx
By feixen on Feb 11, 2008
vPlug 2.1.0
self-healing by pw.
PW AU is ok on all Transponder incl. ORF TRP
AU in 1 minutes
By MrMac on Feb 12, 2008
V 2.1.1
- Some I2 Tweaks.
http://www.zshare.net/download/748531393dff27/
It should work better on RedL’s.
By Vahid on Feb 12, 2008
I Recommend the new update to 2.1.1 to everyone!
The micro-freezes on Redlight-channels are gone. Additionally the Redlight-channels work now 100% rock-solid in SBCL.
THX Vahid.
Ramirez
By ramirez on Feb 13, 2008
MCT update. (lol)
http://www.zshare.net/download/76855092bf3306/
By Vahid on Feb 16, 2008
Great Work!
I think the MCT Group manager have a headache now.
By aLI on Feb 16, 2008
no. they know what we know (completely). it will be shut down in next week or 2.
By Vahid on Feb 16, 2008
It is possible to decrypt the Redlight channels on the Humax 5400 using SBCL / VPlug / WSP.
The keys update about every thirty minutes. Thus, without auto-updating, it becomes very arduous.
I haven’t been able to solve the mystery of the MCT channels as the ECM shows use of Key 16 / 18. Somehow the emulator needs to be “persuaded” that Key 16 / 18 should be read as Key 06 /08.
Mr. Vahlid could you fix it please. ?
Thank you.
By Master on Feb 17, 2008
No I can’t fix it. vPlug works fine if you send EMM’s for it.
SBCL does not support sending EMM’s. Contact its author. He should fix it, not me.
“He” should add newcamd-emm support and your receiver should support newcamd-emm handling too.
By Vahid on Feb 17, 2008
Thank you for quick answer. I´ll try contact him. Keep excelent support please. You are the best.
By Master on Feb 17, 2008
hi vahid.is vplug only compatible with skystar2 ,
or it is compatible with any dvb cards?
is another dvb-s cards support vplug?
i wanna buy a dvb card,i can’t find skystar2 anywhere.therefore i have to buy another card.
but i don’t know another cards support vlug or not.thanks
By amir on Feb 18, 2008
Hi,
vPlug supports 3 different API’s. MD-API, DVB-Core API and DVB-Viewer API.
MD-API is a general one and most of the freeware dvb-app’s are using it.
DVB-Core is designed for MyTheatre. Also some other app’s like RitzDVB are using this API.
DVB-Viewer-API is designed for DVB-Viewer(pro)!
Official dvb-app’s which ship with your card (any card), do not support these API’s.
So you should not ask “does vPlug work with that specific card?”.
You should ask “Does that specific/alternative dvb-application support my card?”. It’s a better question.
And mentioned app’s support most of the dvb cards out there.
If you can not find a SkyStar2 buy a Twinhan/VisionPlus card. It’s also a very good card. And before buying a new card search the net to find which dvb-app’s support your card. SS2 and Twinhan cards have the best support till now. Don’t buy a SS1 based cards. Most of the recent dvb-app’s do not support these cards anymore.
Sometimes It’s not important how much that card is good. If you can not find an alternative dvb-app for your card, you can throw it to the dust-bin.
By Vahid on Feb 18, 2008
“Make sure during AU, selected CA_ID is 0×0628. (otherwise it won’t work)
(or edit your v_sids.db, add MCT’s info and disable auto-ecm)”
How to do this exacly?
Thanks a lot for your efforts.
By lassadbg on Feb 19, 2008
0- Apply recent updates
1- Uncheck Auto-ECM in vPlug’s monitor (for the 1st time and then (after AU) select it again).
2- Double click on the mentioned row which has CA_ID = 0628 (to activate it) and wait for a minute or less.
1&2 are optional and it should work without these steps too.
By Vahid on Feb 19, 2008
Moin
MCT AU is down
channels ok with latest key 06 4EC7XXXXXXXXXXXXXXXXXXXXXXXXXX9B
regards MM
By MrMac on Feb 20, 2008
Polsat`s AU and DigiTV’s AU seems to be down.. Premiere`s AU is working
By Khaled on Feb 20, 2008