vPlug2.2.1
April 6, 2008 – 8:10 pmHistory
———–
- Added EMM filter timeout (to the vPlug.ini file).
+ Some other minor fixes.
Download
(it’s an update for 2.2.0)
- Set RMLOS to 0 in vPlug.ini
————
Update 10.04.08
Sorry, comments for this entry are closed at this time.
82 Responses to “vPlug2.2.1”
Thx vahid sexwiew tested is working
By EMRE on Apr 6, 2008
LA7
062000 M6 7FB1FE04D9876EB84758B25A729E21B4 ; LA7 Encrypted-PMK1
is working ok au with above M6 thanks vahid
By mike on Apr 6, 2008
Moin
Problem by Import the keys from Keys*.txt ?
in v_keys.db we have than keys double = no AU
Before you import the new Keys, e.g. by S*xview you must delete the old MK set 0606 keys M5 , M6 & M8 => you can import and au work
Regards MM
By MrMac on Apr 6, 2008
Thanks Vahid
By ARASHTEAM on Apr 6, 2008
Hi All
Thank’s Vahid S*V Is Tested Ok
Very Thank’s
By Feasta on Apr 6, 2008
good work
By jany on Apr 6, 2008
v_keys.db: ALL OK
delete the old MK AND import ALL NEW KEYS
http://www.mediafire.com/?2xmmqzt1yk1
sexwiew AU
LA7 AU
Thanks Vahid
By ARASHTEAM on Apr 6, 2008
It’ s OK for me too !!!!!!
Many thanks to you Vahid
By Wonderfull on Apr 6, 2008
Hi Vahid,
with updated encrypted PMK1 La7 DVB-T works
Thank you!
By Jump on Apr 6, 2008
Yes, i got it now thx
By TitusBl on Apr 6, 2008
Wanna see vPlug in action ?
http://www.zshare.net/image/1014437991efbddf/
By Jump on Apr 6, 2008
Thanks Vahid
sexwiew working
By Milad on Apr 6, 2008
hi…
1. good job!
2. i thinks you can update files or new version vplug in upload in wordpress or rapidshare or any host!!!
3. site mediafire is down! i can`t download!
*** so sorry for bad English!
By Master on Apr 7, 2008
hello
what is ferequancy of LA 7 ?
thanks for your soppurt.
By ALI on Apr 7, 2008
Thanks Vahid
By Qqun on Apr 7, 2008
in answer to my own previous question i got it from dvbsoft.eu on zshare but
help please
everytime i close progdvb since i installed this 2.2.1, i get this error message:
————————————————————————
An unexpected memory leak has occurred.the unexpected small blocks leak are:
13-20 bytes: Tlist x1
29-36 butes: Tvirtualdata x1
189-204 bytes : Uknown x8
————————————————————————–
it never happened b4, whats going on?
By kb24kb on Apr 7, 2008
Read my 1st post about RMLOS again.
By Vahid on Apr 7, 2008
@ Ali:
Hey bro! Googling before posting is not a bad idea! Anyway you can find the package on Atlantic Bird 1 @ 12.5° West. Have Fun.
http://www.flysat.com/abird1.php
By Vahid021 on Apr 7, 2008
Thanx for all the good job u do vahid,
By ray on Apr 7, 2008
Atlantic bird – 12.5W
12515 H – 17455 3/4
http://it.kingofsat.net/pos-12.5W.php
By BDRSK @ALI on Apr 7, 2008
sorry , my bad ,i didnt read it carefully
thank you . its all good now
By kb24kb on Apr 7, 2008
Does la7 au work at the moment???
By ponti on Apr 7, 2008
la7 down again
By mille on Apr 7, 2008
Hi Vahid I have problem with the last Vplug
loock this Error
http://up102.arabsh.com/my/6d0b7ea.png
if i cloos my prog i have this message?
By Feasta on Apr 8, 2008
Yes, read post #17
By Vahid on Apr 8, 2008
sexwiew also down
By EMRE22 on Apr 8, 2008
S*x view down again for all systems.
By maumixio on Apr 8, 2008
Hi
sorry I’m a complete noob on this.
Basically I’m using ProgDVB (5.14.03) with vplug 2.2.1 with a dvbt usb card under vista x64
At the moment LA7Cartapiù A is transmitting an encrypted show. Both with the old and the new PMK I cannot see a thing.
If I open the channel this is what appears in my vplug log:
Date – Message -
[04/09/2008 12:17:29] ProgDvbNet:LA7Cartapiu’ A – tp_id=$0202, SID=$0006, PMT=$0121
[04/09/2008 12:17:29] ProgDvbNet:LA7Cartapiu’ A – ECM from SidCache: $1FF5
[04/09/2008 12:17:29] ProgDvbNet:LA7Cartapiu’ A – StartECM_Filt-> $1FF5
[04/09/2008 12:17:29] ProgDvbNet:LA7Cartapiu’ A – Added PMT filter, pid=$0121
[04/09/2008 12:17:31] ProgDvbNet:LA7Cartapiu’ A – Timeout on ECM-PID: $1FF5
[04/09/2008 12:17:31] ProgDvbNet:LA7Cartapiu’ A – -> empty pid -> starting AutoECM…
[04/09/2008 12:17:31] ProgDvbNet:LA7Cartapiu’ A – StartECM_Filt-> $1FF5
[04/09/2008 12:17:32] ProgDvbNet:LA7Cartapiu’ A – EMM-CA: Irdeto
[04/09/2008 12:17:32] ProgDvbNet:LA7Cartapiu’ A – Starting I2(0620 – 82403F) emm filter …
[04/09/2008 12:17:32] ProgDvbNet:LA7Cartapiu’ A – SetEMMFilter_MDAPI -> 1201
[04/09/2008 12:17:32] ProgDvbNet:LA7Cartapiu’ A – Starting EMM filter on pid: $1201
I also get under extended info: I2(0620-00) key06
and status: ECM:20*184 B/s
plus lots of hex numbers in Raw ECM stream
But the screen remains black.
It is as if it correctly detected the encrypted stream but the key was wrong.
any help much appreciated
tnxs
By bash on Apr 9, 2008
@bash
Did you read post #23?
@vahid
It is evident that as soon as you post new keys *rdeto or L*7 quick issue counteractions. I wish I could use my card’s PMKs, but how?
By Jump on Apr 9, 2008
I wish I had your card’s HMK’s… (not PMK’s)
By Vahid on Apr 9, 2008
@Vahid
:S :S :S HMKs? the dog bites its tail… I suspect it is no easier, though.
Better to give up…
Thank anyway vahid.
By Jump on Apr 9, 2008
Should be possible in future to have vPlug’s editor window resizable?
By maumixio on Apr 9, 2008
Hi vahid,
I have a question, for which is the button “Send DCW” (radioactive symbol) in the window Show Monitor?
I search by google, but I don’t found anything.
By BadBoy on Apr 10, 2008
;new s.view data 10.04.08
I 060600 M5 334598C5FF5F21C38102C8E7BB5FD951 ; S.View Encrypted-PMK0
I 060600 M6 8A15330B0D74E8A07517E67F5E0CF7A6 ; S.View Encrypted-PMK1
I 060600 M8 5B3006A3BABDF37A27D3535655E849FF ; S.View Encrypted-SA
By Vahid on Apr 10, 2008
tested and work fine thanx vahid
By Night on Apr 10, 2008
thax vahid tested works for new master keys
sexwiew is back
By EMRE22 on Apr 10, 2008
@BadBoy
it’s for quick testing of constant dcw’s.
By Vahid on Apr 10, 2008
Hi,
I installed the 2.2.0 version + update with vplug.dll and vplug.ini 2.2.1 + put recent v_keys.db (from 09/04/2008) + update this db file with last keys found in the last topics and I have this error when I try to open S.View :
“Your key file has not this key : I 061000 M1 XXX….”
What’s wrong? Thanx
By Poon on Apr 10, 2008
nothing. you have to wait for receiving a good emm packet to extract new keys.
0610 is another CA_ID which is not supported (but it’s present on those channels too. ignore it)
+ After updating your key file, close your dvb-s app and then run it. Now it should work fine.
By Vahid on Apr 10, 2008
Ok, it work fine! I had a problem with DVBDream. Great job! Thanx
By Poon on Apr 11, 2008
Thanks sv work good
By Mena on Apr 11, 2008
i take dvbdream+vplug 2.2.1 and all ok §§§!!!
it s verygood thanks to all
By nico on Apr 11, 2008
Hi Vahid,
I couldn’t find anywhere that has a simple answer to my question. Does vplug support AU of Nagra1 for UK Cable? If so, which files/keys do I need? (I can get Fenrir to nearly work, right keys wrong provider).
Thanks & Regards
elFarto
By elFarto on Apr 11, 2008
Great work m8. Keep it up
By Satmoz Forum on Apr 11, 2008
@elFarto
No, It does not.
By Vahid on Apr 11, 2008
hi vahid
sorry vor my english
the download from
(it’s an update for 2.2.0)
its an error
can you check the download file the site send me an error
thx
By papajoe on Apr 11, 2008
tested. there was no error.
install the following add-on and enjoy your life!
https://addons.mozilla.org/en-US/firefox/addon/1865
By Vahid on Apr 11, 2008
thx vahid
By papajoe on Apr 11, 2008
Hi
TPS is not working
everything is right but Vplug dosn’t forward dcw to SBCL
it looks like you have removed SBCL support
Regards
nxix
By nxix on Apr 12, 2008
No, I didn’t. TPS works fine here (with my dvb-s card). Those who provide files for SBCL, don’t know their job at all. This is your current problem. I can upload my today’s files for you, but what about tomorrow?
By Vahid on Apr 12, 2008
Thank you for your fast reply
just could you please tell me the names of file/files Vplug needs for tps
there are many files
tps.bin, tps.fns, v_tps.db, dec.bin, dump.bin, out.bin
thanks again
nxix
By nxix on Apr 12, 2008
v_tps.db, dec.bin
By Vahid on Apr 12, 2008
It would be great if you (or someone else here) could write a better sbcl. One with sending the right sids and with EMM support.
By itsme on Apr 12, 2008
nxix: Tps work with sbcl
By Amin on Apr 12, 2008
I agree with itsme, there would be lots of interest from the STB community for something like sbcl but with EMM support.
By percivjr on Apr 13, 2008
Dear Vahid
Thanks for your kind responses to our questions…
I was trying to watch RAI AFRICA channel on Hotbird 13E, but vPlug couldn’t decrypt it. Would you please tell me how I can watch RAI AFRICA in this current version of vPlug?!
Regards,
By PowerVU on Apr 13, 2008
@itsme/percivjr
Isn’t only a tool (sbcl) problem, but STB’s firmware implementation too. Most STB’ firmware have implemented only ECM send…
If you have Str*ng8100/8000 gold*box STB, you can try SCT (Strong Connection Tool), this tool and related firmware are designed/developped by Tis-Team; Firmware is named Revolution (now we are at version 4.0, but support with EMM/TPS AU is since version 3.1 – October 2007), it have EMM/TPS AU support with vPlug, Tool and firmware work also with others MDPlugins… are supported others gold*ox STB as Phil*ps and Pione*r, but it can use only ECM support(EMM’s firmware implementation less, as written).
Obviously, EMM support is allowed only if STB’s Firmware can put correct data via serial cable: EMMs, some Tables… in our case with our Firmware we have tried to simulate plugin’s interaction as with a dvb-s card… PMT, ProgramData ecc..ecc.. limit is only little serial baud rate, related with complete full stream disponibility of dvb-s card running on PC hardware, but with adeguate (STB) filters and some workarounds for now it work quite well.
By g3rry on Apr 13, 2008
@PowerVU Rai Africa Work fine with vplug
have look here =>http://vplug.wordpress.com/2007/11/09/vplug196/
By Night on Apr 13, 2008
Hello Vahid,
Can you plz help me? My screen is blank when tuning to Sview. I am using vPlug2.2.1 with SBCL V1.0i to watch TPS on my dreambox 7000s which is working perfectly, but not with Sview (ofcourse after changing the TCPNcdPrvs line in SBCL.ini), i keep loading the keys manually but I still get a blank screen. The plugin displays the raw ECM stream, but the ProviderID & KeyIndex & Key & DCW fields each shows an asterisk.
Thanks in advance for your help, and thanks for a great plugin.
SBCL.ini:
…
TCPNcdPrvs=00060600000000062CE932010000000000000000000000
…
vPlug.ini:
…
CAID_IgnoreList=
ProviderID_IgnoreList=
ECM_Filter_Timeout_Sec=86500
…
By Exoon on Apr 14, 2008
Read previous posts plz. SBCL is not designed for sending emm’s to vPlug. So, AU won’t work = No new keys = No color.
+ (in sbcl.ini)
[ECM140]
Descr=S.View
CAID=0606
PrvID=00
Pattern=70 31 xx
Match=0
By Vahid on Apr 14, 2008
one noob question..:)
how you put keys from post #34 in vplug?
By noisy on Apr 15, 2008
@noisy
Keyedit very simply
Start you dvbcards program. go to Plugins->vplug->show monitor
1. click right on BLUE button “show monitor” with left mouse click
2. in search line by ProviderID -> type 060600
3. click on “Search”
4. edit the Key M5 from key*.txt or from this site via copy & insert
5. click on “Update”
6. again for M6 & M8 point 2,3,4 & 5
Here a pic
http://www.sat-mac.info/image/Ir2_kedit.jpg
Regards MM
By MrMac on Apr 15, 2008
Dear Vahid,
Thanks for the info, I already had the [ECM] tag for Sview in my SBCL.ini but didn’t include in here to avoid a length post
Ok I missed what was written previously here regarding SBCL with emm’s.
Thanks again for your help and for a great plugin
By Exoon on Apr 15, 2008
What problem here?
http://img59.imageshack.us/img59/2896/afdsasfxu4.gif
By jon on Apr 15, 2008
- do you have signal? Is your ProgDVB working correctly?
- try other freeware programs such as dvb-dream, alt-dvb, winclip or …
By Vahid on Apr 15, 2008
thanks . it work with alt
By jon on Apr 15, 2008
Free-X and INXTC AU stop working here: and what’s about there?
By maumixio on Apr 15, 2008
it’s the provider’s problem. they are not sending any ecm data on irdeto ecm-pid (of CA-ID=0×626).
By Vahid on Apr 15, 2008
gr8 work vahid, as always.
btw it’s time to change wordpress theme to spring one me thinks
By mahitrah on Apr 16, 2008
@MrMac
thx
By noisy on Apr 16, 2008
@mahitrah
that’s the default logo of wordpress.
feel free to design a new logo … it’s not my job!
By Vahid on Apr 16, 2008
Hi Vhaid ,
at moment Sex.V no work.
Is it my problem ?
I read on V_plug monitor is not present M1 K*Y Ecm-Seed.
Probabily is it change?
Thank’s
By mik on Apr 16, 2008
SexView down
By a123 on Apr 16, 2008
@mik
yes sexview is no longer working
By mike on Apr 16, 2008
Hi Vahid
I’m a vb developper and I wish create a simple plugin for dvb apps
I exported the On_Start and the On_Send_Dll_ID_Name
—————
Sub On_Start(ByVal dvbhinstance As Long, ByVal bHwnd As Long, ByVal dolog As Boolean, ByVal ndllid As Integer, ByVal szhotkey As String, ByVal vers As String)
Sub On_Send_Dll_ID_Name(ByRef dllname() As String)
—————-
the problem is that the dvb app (I used dvbdream) crash when loading my plugin
Please I need some help about the exported functions and their arguments
I’m waiting you @ my mail
Thanks, have a nice day
By houssem_j87 on Apr 16, 2008
mr vahid
help us. all sex*y packages down.
By aaaa on Apr 16, 2008
@houssem_j87
VB6 dll’s are active-x dll’s and those are not pure win32 dll’s. so you can’t use them directly. Also this rule applies to vb.net which its dll’s are .net assemblies.
it’s possible to load .net assemblies by using a pure win32 dll as a proxy. (search Google for “Calling managed code from unmanaged code” )
By Vahid on Apr 16, 2008
not tested (LA7)
I 062000 M5 5920E6D1913CDC31207CCEE33E43D9F4 ; LA7 Encrypted-PMK0
I 062000 M8 B6E106A3BABDF37A27D3535655E849FF ; LA7 Encrypted-SA
By Vahid on Apr 17, 2008
@All
“1″ post about this or that package is down is enough. thanks for your corporation and understanding. I will delete duplicate/repetitive posts (and I did… )
By Vahid on Apr 17, 2008
Hi Vahid, any news about Digiturk I2 encryption ?
They are on 7* east very good package….
By Ja on Apr 17, 2008
no news. there are no public emu’s for this or that package available. I have no card, CAM, anything! All of the keys which you can see on this site are extracted from public emu’s (and all of them were encrypted and extracting of these keys was not an easy task).
so, from now on every post about the keys of this or that package will be treated as a repetitive post and will be deleted.
By Vahid on Apr 17, 2008
it’s time to close this thread.
By Vahid on Apr 17, 2008